The needle – dragon tattoo needles

More color, better shading

This specially machined ® Dragon Tattoo needles / tattoo to make that a 3-fold larger amount of ink can be provided under the skin and effectively in small skin injury. Characteristics are that they are suitable tattoo needles / tattoo by her special touch, ideal for soldering and spread tribals, shadings and fine work.
Reduced time

You want to buy a really good tattoo needle? The Dragon ® needles significantly reduce the execution of a tattoo. It is not necessary to the machine for filling large areas harder to adjust or make a greater skin tension, since the Tattonadel is suitable due to their well-tuning for soft settings. Dragon ® needles also convincing that are destroyed by the very hard steel, the “needle” of a slip on the cap color is not as fast. Among other things, the soldering is uniform so that eg can be used for a 5-tattoo needle tip and an associated.
Quality Guarantee

For the tattoo needle “noble dragon” was a particularly hard steel needle is thus develops not as fast as conventional tattoo needles blunt from other providers. The consistently excellent quality of the tattoo needle is monitored locally by German personnel – consistent soldering and optimal fit in the designated “tip” (needle guide) are just two of the important quality characteristics. The tattoo needle is subject to continuous development.

Miscellaneous prices and quality:
TheSteel for our tattoo needles are manufactured specially for us. We pay very close the the stainless steel has the greatest hardness, thus allowing a much lower wear of the tip of the needle and the needle wears out over Hourslittle off. Another advantage is that we have the Nickelhave kept very low. Which, due to the high hardness of the steel, it is our very difficult to grind it so special machines needed to be very good Needlepointproduce. For this reason, our needles are also considerably more expensive. Desweiterm we offer a Needle warrantyeach of the needle can be used. Everyone has had the experience that were not favorable to use needles at 10-15% since the needles are a bad cut, soldered poorly, or had hoes.
Production:
Our Short Taper grind amounts of 2-3mm of Long Taper grind for 3-6mm.
Round Liner:
are really tight conical forward to 5mm soldered on to provide clean outline.
Round shader:
Are up to 10mm forward soldered to clean shades to create, with this needle can also be created Outlinie.
Magnum:
Up to 10mm soldered to the front so it is always possible, the same spread of about 0.5 mm to achieve.
Soft Edge Magnum:
Up to 10mm soldered to the front so it is always possible, the same spread of about 0.5 mm to the side we get round the needle minimal.